Synergy 8850-2000 2" Starter Lift Kit Suspension System

Enhance your 2020-2022 Jeep Gladiator JT suspension with the Synergy 8850-2000 2" Starter Lift Kit Suspension System from CDP. Synergy MFG Suspension Systems use a synergistic approach, meaning the combined effect of the components is greater than the sum of the individual parts. The overall performance of the system is the most important factor when Synergy is designing components to work together. Synergy MFG Suspension Systems are complete systems for your vehicle and include all necessary components for the lift height and performance advertised.

The Jeep Gladiator JT Starter System is a coil spring 2" lift designed around 37" tires for Rubicon models and 35" tires for non-Rubicon models (See fender and bump stop spacing recommendations below). This system is designed to be the most capable performance coil spring lift on a budget, with room to upgrade as funds allow.

Features:

• Compatible With OEM Wheels
• Lifetime Warranty On All Hard Parts
• Complete Bolt-On System For Easy Install
• Fully Upgradeable To Higher Level Systems
• Improved Off Road And On Road Performance
• No Maintenance Required For All Included Components
• Includes All Components Necessary To Get You On The Trail
• Budget Coil Spring Suspension System To Easily Fit Larger Tires

Benefits:

• Multi-Rate, Progressively Wound Coil Springs Increase Lift Height 2" Over Stock
• Longest In Class Free Length Prevents Coil Springs From Coming Unseated At Full Articulation
• 100% Bolt On Components Assure An Easy, Trouble Free Installation With The Use Of Basic Hand Tools
• Coil Springs Are Guaranteed To Resist Bowing And Have A Lifetime Guarantee Against Sagging/Breakage
• Front Bump Stop Spacing Is Adjustable From 2-4" In 1" Increments Without Having To Remove Any Hardware
• Coil Spring Block Height Has Been Designed Around Optimal Bump Stop Spacing For The Lift Height And Tire Size
• Coil Springs Are Unique Lengths For Each Corner Of The Vehicle To Compensate For Weight Distribution And Prevent Leaning
• Suspension Components Feature An Abrasion-Resistant Powder Coat Finish For Maximum Durability And Corrosion Resistance
• Industry First "Closed And Ground" Front Coil Springs Ensure Perfect Fitment With The Included Front Lower Coil Spring Isolators
• Front And Rear Sway Bar Link Relocation Brackets Maintain Factory Sway Bar Geometry To Allow Full Articulation Of The Suspension And Maintain Compatibility With Stock Wheels

8850-2000 - 2" Starter Lift Kit Suspension System Includes:

(1) 8863-20 2" Front Coil Springs, Pair
(1) 8865-20 2" Rear Coil Springs, Pair
(1) 8057-10 Snap-Lock Bump Stop Spacers
(1) 8858-20 Rear Bump Stop Extension, 2.0 Tall
(1) 8855-02 Front Sway Bar Relocation Brackets
(1) 8808-01 Rear Sway Bar Drop Brackets

Wheel and Tire Fitment:

Recommended tire size is limited by fender clearance. With higher clearance fenders or trimmed fenders, larger tires may be fitted. Bump stop spacing should be matched to the collapsed length of the shocks. Mismatched bump stop spacing and shocks will limit the available travel from the system.

If using Stock Shocks, this kit MUST be used with 8817 JT Shock Relocation Brackets.

Synergy MFG coil springs lift the vehicle the advertised height over stock based on a fully loaded JT Rubicon. Other JT models will see more lift over stock. These coil springs do not lift taller than advertised. The stock rake based off the Rubicon model is kept to retain its load carrying capacity. If you prefer the vehicle to sit level when unloaded, Synergy recommends adding a small coil spacer to the front (up to 3/4-inch without affecting up travel or causing coil bind, 8017-075).

Synergy MFG is not responsible for maintaining finish of products. Environmental factors will affect rate of corrosion and wear for items advertised to be corrosion resistant. Synergy recommends using protective coatings for all items that will see extended outdoor and off road use. Synergy has had great experience with the Fluid Film product and recommend it and similar products for any items susceptible to damage from corrosion. It is great for keeping double adjuster assemblies working like new and protecting shock bodies from the elements.

If installing on an EcoDiesel equipped model, Synergy Rear Sway Bar End Links Part # 8861-11 MUST be used instead of 8808-01 Rear Sway Bar Drop Brackets (See Related Item Below).