Skip to product information
1 of 1

Rough Country

Rough Country 392.23 5 inch Suspension Lift Kit | 2003-2007 Dodge RAM 2500/3500 5.9L Cummins

Rough Country 392.23 5 inch Suspension Lift Kit | 2003-2007 Dodge RAM 2500/3500 5.9L Cummins

Regular price $899.95 USD
Regular price Sale price $899.95 USD
Sale Sold out

Features:

  • 5-inch front lift for 2003-2007 4WD diesels
  • Four Premium N3 shocks included at no extra cost
  • 10-stage Velocity Sensitive Valving for smooth highway ride
  • High-pressure nitrogen-charged shock design
  • Control arm drop brackets improve driveline geometry
  • Reuses your stock control arms
  • Track bar bracket keeps front axle centered
  • Fabricated lift blocks outlast cast blocks
  • Maintains factory steering angles
  • Works with factory 17-inch and 20-inch wheels
  • Lifted coil springs and extended sway bar links
  • Lifetime warranty on hard suspension components

Five Inches Of Lift And A Drop Bracket System That Keeps Your Stock Arms Happy

A 2003 to 2007 Ram with the 5.9L Cummins already has a loyal following, and a 5 inch lift gives it the stance to match. This Rough Country kit adds 5 inches of ride height up front, so you can clear off road obstacles without worrying about damage underneath. The extra ground clearance gives the truck a powerful off road presence, too. Rough Country includes its Premium N3 shocks at no extra cost, custom tuned for this application, so the ride is built around the weight of your truck. Those shocks use Velocity Sensitive Valving with 10 stages, which gives you a smooth highway ride and good control on rough ground from the same shock, with no adjustment needed. The rear lift blocks are fabricated, which Rough Country says makes them stronger and longer lasting than cast blocks. The kit also uses a control arm drop bracket system that keeps your stock arms at a gentler angle, which improves ride quality and caster for better drivability. A lifetime warranty on the hard suspension components backs the kit, so you can build the truck with confidence.

Every Component From Coil Springs To N3 Shocks And Which Trucks Get Left Out

The Rough Country 392.23 is a 5 inch suspension lift kit for 2003-2007 Dodge Ram 2500 and 3500 4WD diesel trucks with the 5.9L Cummins. The front uses lifted coil springs, control arm drop brackets, a pitman arm, a track bar drop bracket, and extended sway bar links, and the rear uses 4 inch fabricated lift blocks with U bolts. The drop brackets let you mount your stock control arms at a reduced angle, which eliminates the steep angle often seen on 5 inch and larger kits and improves driveline geometry. The N3 shocks are high pressure nitrogen charged, with 10 stage variable valving, a 35mm piston, an 18mm chromed hardened piston rod, and a 54mm shock body that dissipates heat faster. They also have a spring loaded piston rod seal, rubber bushings, 36kN tensile strength, and military spec fluid rated to minus 40 degrees Celsius. The kit maintains factory steering angles and works with the factory 17 inch and 20 inch wheels, and the track bar bracket keeps the front axle centered. It requires minor drilling, and it does not fit dually models or Power Wagon models. On Mega Cab trucks with a two piece driveshaft and carrier bearing, there is potential for take off vibration, which Rough Country says can be corrected by shimming down the carrier bearing.

Fitment: 2003, 2004, 2005, 2006, 2007 Dodge RAM 2500/3500 5.9L Cummins Diesel 4WD SRW

Notes:

  • Does not fit dually (DRW) models, and does not fit Power Wagon models
  • For diesel models, Rough Country makes a separate lift kit for gas trucks, confirm your engine before ordering
  • Requires minor drilling
  • On Mega Cab models with a two-piece driveshaft and carrier bearing, there is potential for take-off vibration, depending on severity this can be corrected by shimming down the carrier bearing
  • 5" lift, maintains factory steering angles, works with factory 17" and 20" wheels
  • Retailer listings show the kit includes lifted front coil springs, control arm drop brackets, a pitman arm, a track bar drop bracket, extended sway bar links, 4" fabricated rear lift blocks, U-bolts, hardware, and four Premium N3 shocks
  • Control arm drop brackets reuse your stock control arms at a reduced angle
  • Warranty: lifetime on hard suspension components, 5 years on leaf and coil springs, and 3 years on shocks
  • California Proposition 65 warning applies to this product

Install Instructions

View full details